Description
Attach the Mad Hops Keg Infuser when you change over to a new keg. Installation is a snap. It takes just minutes to install using the same tools you use when replacing a keg.
Once the Keg Infuser is installed, refills are easy. Just replace the bottle of Mad Hops during the keg change process.
Complete instructions – First Time Install
- Turn off the C02 supply
- Disconnect the keg coupler from an old, empty keg
- Unscrew the CO2 line from the keg coupler
- Screw the CO2 line into the Mad Hops Keg Infuser
- Screw the Mad Hops Keg Infuser hose into the keg coupler
- Screw a new, full Mad Hops Flavor Jug into the Keg Infuser
- Hang the Mad Hops Keg Infuser on the side of the keg
- Attach the keg coupler to a new, full keg
- Turn on the CO2 supply, this will pressurize the system and force Mad Hops Flavor Concentrate into the keg to infuse it
- Draw at least two beers from the tap to make room for the Mad Hops formulation in the keg. Wait two minutes for the flavor to mix with the entire keg.
Note: Keep the Mad Hops infusing device as level as possible during the install process.
Replacing a used Mad Hops Flavor Jug
- Turn off the C02 supply
- Disconnect the keg coupler from the old, empty keg
- Detach the Mad Hops Keg Infuser from the keg rim, leaving the hoses connected to the Keg Infuser and keg coupler
- Unscrew the old, empty Mad Hops Flavor Jug from the Keg Infuser
- Screw a new, full Mad Hops Flavor Jug into the Keg Infuser
- Attach the keg coupler to a new, full keg
- Turn on the CO2 supply, this will pressurize the system and force Mad Hops Flavor Concentrate into the keg to infuse it
- Draw at least two beers from the tap to make room for the Mad Hops formulation in the keg. Wait two minutes for the flavor to mix with the entire keg.
NOTE: If you are using a foam preventer (FOB) you will need to purge the line like you do when changing beer brands.
Reviews
There are no reviews yet.